How to wire an RGB Colour LED Strip Light in 5 simple steps. Continue reading
LED Strip Lights are one of the most versatile types of lighting available and this is not just because they are flexible. They can also be cut to custom lengths, which means they can be potentially made to meet the requirements of any installation, no matter how big, or how small.
While it is possible to get your lights cut by a professional, the process is so simple that you can also do it yourself. If, for example, you find that your strip lights is slightly too long for the area in which you plan to install it, you can chop a section off the end to make it fit. Alternatively, if you have a large, single strip of LEDs, but you would prefer two seperate pieces, you can cut the strip in half.
LED Strip Lights can be cut at 5 or 10 cm intervals, depending on the type of strip light purchased. The "cutting points" are clearly marked with a straight line. To seperate your strip lights, cut along the line using a pair of scissors or craft knife. Always make sure the tool you are using is sharp, as a blunt tool could potentially cause damage to the circuit board and components.
Due to their design, LED Strip Lights will continue to work even after they have been cut. This is because their circuit is completely closed at each cutting point. If you are removing a section from the end of your strip light, always make sure you are cutting it at the end away from the connector.
If you are cutting you strip lights into two parts and plan to use them as two separate installations, you will also have to do a bit of soldering. At each cutting point there should be a series of solder points (circular metal discs), 2 in the case of single colour lights and 4 in the case of colour changing RGB. To attach a new length of 2 core or 4 core cable, you will need to solder the wires to their corresponding solder points (which should be clearly marked for this purpose).
Soldering isn't a difficult task, but obviously requires the requisite tools, which most people don't own. Asking an electrician to do the soldering on your behalf will also work out to be fairly expensive as you are of course paying for their time. The cheapest, and safest option is to ask your retailer to prepare everything beforehand.
LED Strip Lights offer a number of advantages over more traditional luminaires. Some of these are generic to LED technology, while others are exclusive to LED Strips. This article will outline a few of the reasons thousands of customers are introducing LED Strip Lighting into their homes. Continue reading