How to wire an RGB Colour LED Strip Light in 5 simple steps.You will need:
- RGB Colour LED Strip Lights
- RGB Colour Touch Controller
- LED Driver
NB. Ensure the mains power supply is disconnected before attempting any electrical work.
Step 1. Check all items to ensure they are in good condition and undamaged. If anything arrives in a damaged condition, let us know straight away and we will arrange for a replacement.
Step 2. Insert the positive (red) and negative (black) wires from the driver into the DC + and DC - ports on the RGB Colour Touch Controller. Use your screwdriver to tighten the screws and secure the wires in place.
Step 3. Take the red, green, blue and black cables on your RGB Colour LED Strip Light and insert them into their respective ports on the RGB Colour Touch Controller. The three coloured wires should correspond with the R, G and B ports on the controller, while the black wire goes into the V+.
Step 4. Connect the LED Driver to the mains supply using the live and neutral cable supplied.
Step 5. Put the batteries in the remote and switch on the power. If the power is reaching your RGB Colour LED Strip Lights they should begin skipping through the colours. Don't worry, they're not broken, this is just their factory setting. Use the RGB Touch remote to change them to the desired setting.
Remember, if you get stuck our customer service team can help. Give them a call on 0116 321 4120 or email email@example.com and someone will get back to you.
Stay tuned for more wiring diagrams and installation tutorials.